CENOFIL™ Products

CENOFIL™ 300

CENOFIL™ 500

NOTE: Customized grades available, detailed product datasheets and MSDS available on demand

Typical Chemical Properties:

  • Al2O3 27% - 33%
  • SiO2 55% - 65%
  • Fe2O3 6%
  • Gas Carbon Dioxide 70%
  • Nitrogen 30%

Particle Size Range (microns)

  • 5-500 (microns)
  • 5-300 (microns)
  • 5-150 (microns)

Physical Properties:

  • Average Particle Density: 0.6 - 0.8 g/cc (44lbs/ft3)
  • Average Bulk Density: 0.35 - 0.45 g/cc (25lbs/ft3)
  • Hardness: Mohs Scale 5 (Average)
  • Wall Thickness: 5%-10% Sphere Diameter
  • Melting Temperature: 1200°-1350°C (2190°-2460°F)
  • Thermal Conductivity: 0.11 Wm-1K-1
  • Loss on Ignition: 2 %
  • Maximum Surface Moisture: 0.3%
  • Maximum Crush Strength: 105-210 kg/cm2 (1500 - 3000 psi)
  • Oil Absorption: 16-18 g oil/100g

Advantages of CENOFIL™ Cenospheres


Spherical

The sphere is nature's most effective shape with the lowest surface area compared to volume.

Advantage - less resin, binder, water etc to wet out the surface = low resin or binder demand. Benefit of high solid formulations, lower shrinkage and lower
 cost.

Lightweight

All industries are moving towards lightweight products, demand for the lowest possible weight for plastic parts, sealants, putties, sound dampening etc.

Advantage - ease of application and use, lower transport costs plus low slump and sag for the
 building industry. .

Inert

Fillite is neutral in pH and does not interfere in the chemistry or reaction of the products they are used in. Fillite is inherently alumina silicate spheres of very low reactivity, slightly pozzolanic however this minor reaction is highly desirable in cement as the presence of unreacted free lime deteriorates cementitious products.


Advantage - neutral in pH and resistant to acids and alkalis.

Free Flowing

Spherical fillers exhibit excellent flow characteristics.

Advantage - easy to spray, pump, trowel.

Insulating

Benefit for applications such as insulating refractories, oil pipe line insulation, geothermal cements, external wall insulation stuccos etc.

Advantage - low thermal conductivity (0.11 Wm-1K-1).

High Melting Point

Benefit for applications such as high temperature refractories and fire resistant coating and paints.

Advantage - high melting point (1200 - 1400oC).

Hardness

Advantage - hard surface provides erosion and weather resistance (Mohs scale 5).

Electrical Properties

Benefit for excellent electrical properties for applications such as potting compounds, electrical encapsulation, solenoids, buzz bars etc.

Advantage - properties are virtually unaffected at high frequencies.

Low Oil Absorption

Due to spherical & low surface area shape with non-porous shell.

Good Packing Factor

Ratio of bulk/ true density is small resulting in high packing factor which has beneficial effects on transport & warehousing costs.